Hobbywing MAX8 ESC EzRun 4278SD 2250KV G2 Brushless Motor Combo XT90 38010405

Hobbywing MAX8 ESC EzRun 4278SD 2250KV G2 Brushless Motor Combo XT90 38010405Efficient cooling systemThe frameless fan design is a patented technology. Rapid transmission of internal heat to the integrated housing radiator is made possible by high airflow from the side of the fan, and a copper thermal conduction sink on the internal power plate. These are built into high-reliability thermal systems to ensure that the ESC is always in good thermal condition.1/8th Brushless System Turbo TechnologyThe ESC is best paired with the EzRun 4278/4268SD G2 motor to achieve maximum performance.Turbo parameters are adjustable from up to 32 degrees, and the speed is significantly increased by up to 25%.Capacitor Thermal ProtectionCapacitor thermal protection implemented by the ESC prevents irreversible damage to the ESC due to overload.Super Internal BECThe built-in switch mode BEC features a maximum output of 15A,and is voltage adjustable from 6V to 8.4V (step:0.1V). This allowsthe use of various standard and high voltage servos.Built-in CapacitorThe ESC has three built-in 680uF capacitors, which increasesthe performance by 74% (870uF) compared to the MAX8 ESC.The ultra-large capacitors built onto the ESC also ensure users do not need to install external capacitors on their vehicles.Real-time data & data logging function,Easy to get the power running status. After connecting the OTA module box, turn on the real-time data recording function to access the operating status.New sensored cable interfaceThe Max8 G2 ESC is equipped with a new type of sensored cable interface.It is high recommended to use the motors from Hobbywing, as the waterproof protection level is at the highest level (IP67).Features:The ESC uses a special process, coupled with an innovative waterproof design, to increase waterproofing and dust-proofing performance in harsh conditions.Built-in ultra-powerful switch mode BEC with a continuous current of 6A, (15A max), and support for 6V/7.4V/8.4V output.Equipped with the most advanced and safe electronic switch.Supports up to 32-degree turbo timing. When used with the matching motor (such as EZRUN 4278SD), the maximum rpm can be increased by about 25%.Support LED program card, LCD G2 program box, OTA programmer (Note: optional) to set the parameters of the ESC.Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, and current protection.Specifications:Scale Vehicles 1/8thSensored and sensorless brushless motor4S Lipo: KV=3000; 6S Lipo: KV=24006V / 7.4V / 8.4V adjustable, continuous current 10A (Switch-mode)60(L)x48(W)x40.5(H)mmInput:XT90 Output:6.5mm gold plug(female)