Controller DSE8610 for Deep Sea Electronics Deep Sea Modul

Controller DSE8610 for Deep Sea Electronics Deep Sea Modul

Part Number:
DSE8610

Application:
PRODUCT VARIANTS
8610-02 ?8610 MKII Synchronising & Load Sharing Control Module (Ct, Rtc)
DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous

CRANKING DROPOUTS
Able to survive for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries

MAXIMUM OPERATING CURRENT
460 mA at 12 V, 245 mA at 24 V

MAXIMUM STANDBY CURRENT
375 mA at 12 V, 200 mA at 24 V

CHARGE FAIL/EXCITATION RANGE
0 V to 35 V
OUTPUTS

OUTPUT A (FUEL)
15 A DC at supply voltage

OUTPUT B (START)
15 A DC at supply voltage

OUTPUTS C & D
8 A AC at 250 V AC (Volt free)

AUXILIARY OUTPUTS E,F,G,H,I & J
2 A DC at supply voltage
GENERATOR & BUS

VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
25 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE
3.5 Hz to 75 Hz

MAGNETIC PICK-UP
VOLTAGE RANGE
+/- 0.5 V to 70 V

FREQUENCY RANGE
10,000 Hz (max)
BUILT-IN GOVERNOR CONTROL

MINIMUM LOAD IMPEDANCE
1000
Fully isolated

GAIN VOLTAGE
0 V to 10 V DC
Fully isolated

OFFSET VOLTAGE
+/- 10 V DC
Fully isolated
BUILT-IN AVR CONTROL

MINIMUM LOAD IMPEDANCE
1000
Fully isolated

GAIN VOLTAGE
0 V to 10 V DC
Fully isolated

OFFSET VOLTAGE
+/- 10 V DC
Fully isolated

See Details:
KEY LOAD SHARE FEATURES:
Peak lopping
Sequential set start
Manual voltage/frequency adjustment
R.O.C.O.F. and vector shift
Generator load demand
Automatic hours run balancing
Mains (Utility) de-coupling
Mains (Utility) de-coupling test mode
Dead bus sensing
Bus failure detection
Direct governor and AVR control
Volts and frequency matching
kW and kV Ar load sharing

KEY FEATURES
Comprehensive loadshare capabilities
Configurable inputs (11)
Configurable outputs (8)
Voltage measurement
Built-in governor and AVR control
kW overload alarms
Comprehensive electrical protection
Magnetic pick-up
Electronic engine capability
RS232 & RS485 remote communications
Modbus RTU
PLC Functionality

Multi event exercise timer
Back-lit LCD 4-line text display
Multiple display languages
Automatic start/Manual start
Audible alarm
Fixed and flexible LED indicators
Event log (250)
Engine protection
Fault condition notification to a designated PC
Front panel mounting
Protected front panel programming
PC configuration
Configurable alarms and timers
Configurable start and stop timers
SMS alert messaging
Remote monitoring
Compatible with DSE8700 Series

KEY BENEFITS
RS232 & RS485 can be used at the same time
DSENet connection for system expansion
PLC functionality
Auto voltage sensing
Five step dummy load support
Five step load shedding support
High number of inputs and outputs
Worldwide language support
Configuration Suite PC software
Direct USB connection to PC
Ethernet monitoring
USB host
Data logging & trending.

Note:
When placing an order, please contact us with engine /air compressor nameplate so that we can check it (or prepare the operating procedures more accurately for you).